7/16/2026: I am stocking the V2-RMR/507 plates and have a bunch ready to ship in DLC black.
Notice on Fit: I had two V2 slides in the shop and each had variations in its optic cut that were significant. I modified my design to fit both slides but, do anticipate there being more variations as I have only had a small sample and can not get any response from them on their slide cut. If you have an issue with the plate fitting your slide, I will adjust/modify the plate.
This plate is specifically for the Atlas Gunworks V2 slide cut. It only as 2 screws for the plate to slide.
Utilizing 6Al-4V Titanium to secure your optic to the slide. The properties of grade 5 titanium are highly sought after in structural applications, and it is also very thermally stable greatly reducing thermal expansion and stress. This helps prevent screws from loosening or breaking. Titanium is also lighter than the 4100 series of steel other manufacturers use which will help with slide cycling. The underside of this plate is also machined to take advantage of the pocket machined into the Atlas slides. It contacts the walls to help reduce plate movement. This also ensures the screws are not taking lateral loads and are only holding the plate down.
IRON SIGHTS: With this being a new offering, plates will not have Iron sights. I plan to offer some in the future but right now I do not have them designed. If running the RMR, SRO, or RMRhd, I suggest looking at Parker Mountain Machine IDRS. This plate will allow you to utilize your factory front sight and be extremely close to POA/POI. I cannot guarantee all pistols will be exact as each pistol can have its own variations.
SCREWS: You will receive two 5-40 T10 Torx head screws for the plate to slide. Trijicon, Holosun, and Vortex optics will include custom titanium screws for the optic to plate.
7/16/2026: I am stocking the V2-RMR/507 plates and have a bunch ready to ship in DLC black.
Notice on Fit: I had two V2 slides in the shop and each had variations in its optic cut that were significant. I modified my design to fit both slides but, do anticipate there being more variations as I have only had a small sample and can not get any response from them on their slide cut. If you have an issue with the plate fitting your slide, I will adjust/modify the plate.
This plate is specifically for the Atlas Gunworks V2 slide cut. It only as 2 screws for the plate to slide.
Utilizing 6Al-4V Titanium to secure your optic to the slide. The properties of grade 5 titanium are highly sought after in structural applications, and it is also very thermally stable greatly reducing thermal expansion and stress. This helps prevent screws from loosening or breaking. Titanium is also lighter than the 4100 series of steel other manufacturers use which will help with slide cycling. The underside of this plate is also machined to take advantage of the pocket machined into the Atlas slides. It contacts the walls to help reduce plate movement. This also ensures the screws are not taking lateral loads and are only holding the plate down.
IRON SIGHTS: With this being a new offering, plates will not have Iron sights. I plan to offer some in the future but right now I do not have them designed. If running the RMR, SRO, or RMRhd, I suggest looking at Parker Mountain Machine IDRS. This plate will allow you to utilize your factory front sight and be extremely close to POA/POI. I cannot guarantee all pistols will be exact as each pistol can have its own variations.
SCREWS: You will receive two 5-40 T10 Torx head screws for the plate to slide. Trijicon, Holosun, and Vortex optics will include custom titanium screws for the optic to plate.
Image 1 of 17
Image 2 of 17
Image 3 of 17
Image 4 of 17
Image 5 of 17
Image 6 of 17
Image 7 of 17
Image 8 of 17
Image 9 of 17
Image 10 of 17
Image 11 of 17
Image 12 of 17
Image 13 of 17
Image 14 of 17
Image 15 of 17
Image 16 of 17
Image 17 of 17