Glock MOS - Trijicon RMR/SRO/507C footprint.
This adaptor plate is made from 6Al-4V titanium. It fits the Glock 17, 19, 34 and 45 MOS mount and the Trijicon RMR footprint and its copies like the Holosun 507C and 508T. Machining tolerances are under .0025”. If for some reason the plate does not fit your Slide or optic, I will either replace the adaptor plate or machine your plate to a better fit. You will not find a better plate for your pistol.
Co-witness most suppressor height sights including Trijicon, Heinie and many others.
The G45 has a slightly different optic cut that causes interference with the extractor spring when using the longer (8mm) screws I include with the normal package. If using my plates on a G45, please use the shorter (6mm) screws on the extractor side screw hole.
Screws, Custom Titanium screws have been added to this package.
This adaptor plate is made from 6Al-4V titanium. It fits the Glock 17, 19, 34 and 45 MOS mount and the Trijicon RMR footprint and its copies like the Holosun 507C and 508T. Machining tolerances are under .0025”. If for some reason the plate does not fit your Slide or optic, I will either replace the adaptor plate or machine your plate to a better fit. You will not find a better plate for your pistol.
Co-witness most suppressor height sights including Trijicon, Heinie and many others.
The G45 has a slightly different optic cut that causes interference with the extractor spring when using the longer (8mm) screws I include with the normal package. If using my plates on a G45, please use the shorter (6mm) screws on the extractor side screw hole.
Screws, Custom Titanium screws have been added to this package.
This adaptor plate is made from 6Al-4V titanium. It fits the Glock 17, 19, 34 and 45 MOS mount and the Trijicon RMR footprint and its copies like the Holosun 507C and 508T. Machining tolerances are under .0025”. If for some reason the plate does not fit your Slide or optic, I will either replace the adaptor plate or machine your plate to a better fit. You will not find a better plate for your pistol.
Co-witness most suppressor height sights including Trijicon, Heinie and many others.
The G45 has a slightly different optic cut that causes interference with the extractor spring when using the longer (8mm) screws I include with the normal package. If using my plates on a G45, please use the shorter (6mm) screws on the extractor side screw hole.
Screws, Custom Titanium screws have been added to this package.
Screw torque specs: I recommend the M3x.5 screws (plate to slide) be torqued between 12-15 inch/lbs. The 6-32 screws (optic to plate) can be torqued between 15-20 inch/lbs. It is best to walk the screws up to spec. Start lower and slowly increase each screw to the torque spec.